Hi-Therma Monobloc unit is an air to water heat pump system that indoor unit and outdoor unit are combined as one module, which ensures all functions are achieved with a single outdoor unit.Therefore, there is no need for refrigerant piping work since Monobloc unit located outside is connected only to water piping. Further, hydronic components such as plate heat exchanger, expansion tank and water pump are included in the package.
| Refrigerant Type | R32 |
| Line-up | 4.4/8.0kW |
| Application |  |
| Energy Label Space Heating 35℃ | A+++ |
| Energy Label Space Heating 55℃ | A++ |
Simplified Installation
Hi-Therma Monobloc unit featuring all-in-one design allows easy installation without additional refrigerant piping work and refrigerant charge. Only the connection of water pipes is required on site, which greatly simplifies the on-site installation work.
Eco-friendly Refrigerant R32
R32 refrigerant contributes to meeting the F-gas regulation targets as described in EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution for attaining the new European CO2 emission targets.
Features:
- Zero Ozone Depletion Potential (ODP)
- Lower Global Warming Potential (GWP)
- Less charge amount under the same capacity
- Single component refrigerant, easy to handle and recycle
High Efficiency A+++
Hi-Therma offers the best and efficient solution for home heating and hot water supply. It has the top class A+++ energy classification under the low-temperature water condition, and A++ under the mid-temperature water condition, which ensures you make savings on your energy bills, reducing electricity consumption and the impact on the environment.
Wide Operation Range
Stable operation is guaranteed, even with outdoor temperatures as low as -25℃, effectively satisfying the heating demand in extremely cold areas. It can generate up to 60℃ leaving water from the indoor unit. Besides, the operation range of DHW is extended to 40℃, and the water inside the water tank can achieve max. 75℃ with electric heater, enabling effective sterilization.
Interlock with 3rd Party Heat Source
Hi-Therma system can interlock with the 3rd party heat source, like the solar thermal or the boiler which can work as an auxiliary heat source. Thanks to the interlock design, both the user experience and energy efficiency can be optimized.
Smart Grid Interlock and PV Enabled
Hi-Therma system can be integrated into the smart grid, to achieve a low-cost operation required to meet carbon reduction targets. Also, the system can be integrated to the Photovoltaic(PV), saving energy through renewable sources. The system’s potential can be maximised by connecting to Smart Grid or Photovoltaic(PV).
Two Separate
Temperature Cycles
Two temperature zones through the separate heating cycles is possible with the mixing valve kit, enabling different water temperatures for underfloor heating and the radiator.
Low Noise Operation
Low Noise Mode
The air to water heat pump system can work in low-noise operation mode for optimal user comfort, which can be achieved just by one touch in the controller or through the setting of input/output. Max.8 dB(A) can be reduced during this mode.
Night Shift Mode
Under the night shift mode, the operation period can be set according to users’ demand freely. The sound pressure level can be reduced to 35dB(A)*.
All these settings can be achieved in the controller or through the setting of input/output.
Up to 7 Rooms with Independent Temperature Control
In one Hi-Therma system, the temperature of up to 7 rooms can be independently controlled，through installing temperature sensors or room thermostats in the rooms, satisfying the diverse needs of customers.
Note: In one Hi-Therma system, up to 2 room thermostats and max. 6 wall mounted temp. sensors can be connected.
Swimming Pool Heating
Hi-Therma heat pump system can also achieve heating swimming pools. When the swimming pool operation is activated, the hot water will go into the swimming pool heat exchanger, allowing to heat the swimming pool water temperature to a comfortable water temperature between 24 and 33℃.
Smart APP Control
Hisense Smart APP control is for those who live their life on the go and who want to manage their heating system at anytime and anywhere.
How it works
After connecting the Hi-Mit adapter to the internet by wireless or wired LAN, the users can control the Hi-Therma system just using a phone anytime and anywhere, achieving operate all the functions through the app.
